Sunday, August 23, 2009

Configuring Cain and Abel - Tutorial 1

This is the beginner's tutorial to Cain and Abel. In this tutorial I will teach you the basics of Cain and Abel and tell you how to configure this tool. To start off, let us talk about how to start configuring your Cain application. So here it is:

1>>Open the command prompt by typing 'cmd' in Run and pressing enter.
2>>Now type this "ipconfig /all" and press enter.
3>>All the Network Adapters you have installed on your machine will be displayed along with their MAC addresses. Locate the one you will be using for hacking and copy it's MAC address in the notepad.
4>>Now open Cain and click on the Configure option at the top. A dialog box will open which will be listing your Network Adapters.
5>>Locate the Network Adapter by matching the MAC address you noted down and select it. Click OK.



Now you've configured Cain to work wonders for you. 


6 comments:

uzair hashmi said...

my adaptor list is empty .. what to do then ?

STANLEY BIMELA said...

HOW CAN I HACK MY NEIGHBOURS WIFI USING CAIN AND ABEL

Magician Timothy Tyler said...

You can't hack wifi with Cain and Abe comment is toward the user below

Magician Timothy Tyler said...

Comment to user above

Magician Timothy Tyler said...

Type ifconfig /allcompartments /all

Frederick Kanu said...

BELOW IS THE MESSAGE I GET EACH TIME I TRY TO USE CAIN, PLS SOMEBODY HOW CAN I RESOLVE THIS PROBLEM?

WARNING!!! TCP Large/Giant Send Offloading is enable for the current network interface. Cain's SSL MitM attacks could be affected;
Please check the Windows's advanced settings of your network interface configuration.
Alternatively you can globally disable task offloading features with the following command;

netsh int ip global taskoffload=disable

Remember to deactivate and re-activate the network interface after the above command.

Post a Comment